PowerKey 1000 CAN - Standard Version

SOFTWARE FEATURES

CAN and RS485 Keypad Addresses – Assign any valid CAN (J1939) address to the keypad while also assigning the same or a different RS485 address. Communicate on either BUS simultaneously.

CANopen Communications Protocol – Fully compliant with Device Profile 401d.

J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages but can be adjusted in a wide range.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages but can be adjusted in a wide range.

HARDWARE FEATURES

IP67/NEMA6 rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

STANDARD FEATURES

• Custom laser etched icons
• Multiple LED status indicators per function
• Low profile
• Compact
• Vertical or horizontal mount
• Overlay
• Laser Etch
• Pad Print
• Flush-mount or front-mount
• LED backlit icons
• ON/OFF, momentary, toggle & scroll

SOFTWARE FEATURES

• Change CAN keypad addresses independently
• Periodic Status transmission
• Heartbeat
• Event status transmission
• LED acknowledgement
• Address claim transmission
• CANopen, J1939

OTHER BENEFITS

• Programmer’s manual available to help support plug-and-play reconfigurability
• Available in fixed legends

SPECIFICATIONS FOR STANDARD KEYPADS

ELECTRICAL

Supply Voltage 12-24Vdc Nominal (8-32VDC)
Standby Current <50 mA
Communication BUS CANopen, J1939

MECHANICAL

Connector Deutsch DT04-4P, Molex 19418-0004, Micro-C and more
Switch Life 3 million operations
Mechanical Shock X, Y, Z 50Gs 11ms
Vibration X, Y, Z 10 - 150Hz 0.15mm amp
Mounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tin
Keypad Silicone rubber with polyurethane hardcoat
PC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copper
Operating Temperature -40°C to +85°C
Storage Temperature -40°C to +85°C
Thermal Shock -40°C to +72°C @ 4°C/Min
Humidity 0 to 98% (no condensation)
UV Protection UVB 400 hours
Salt Spray Per ASTMB117
Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner
Ingress Protection Rating IP67/NEMA6